Maker Pro
Maker Pro

Help please Charger problem

Gryd3

Jun 25, 2014
4,098
Joined
Jun 25, 2014
Messages
4,098
That's fine
Thank you for your time and expertise
I knew it was a shot in the dark
But again thank you for your time
Regards
John
Sorry it took so long to get to this point, but don't count it as a loss just yet. There are more experienced guys on here that may have a tip. I'm just concerned that trouble shooting the part that had the sticker on it will result in a large investment of time experimenting with the board to determine how it 'should' work considering the program on it would be custom written for this board and we can't tell what the program is... It could be a supporting component that is connected to the PIC, but again, I am unsure how to locate it at the moment.
 
Top