Din rail timer

[Nicholas bray]

Hi can anyone point me in the direction of a din rail mounted timer that can be configured so that once it's triggered will give a short pulse on its output with 1 min gaps in between until the trigger is removed

Thanks
And merry christmas
Nicky

 

[Minder]

Here is the usually available commercial models.
M.

 

[Nicholas bray]

Thanks very much I'll have a read I was testing one on the bench this afternoon had it working but not sure it does what I want it to do

 

[Nicholas bray]

I think the repeat cycle (on first) would work as long as there were 2 timer adjustments where I could set timer on for 0.5 seconds for instance and timer 2 delay off time 60 secs

 

[Nicholas bray]

I think the repeat cycle (on first) would work as long as there were 2 timer adjustments where I could set timer on for 0.5 seconds for instance and timer 2 delay off time 60 secs

 

[Nicholas bray]

 

[Nicholas bray]

I think something like this would work but I can't find anything like it on rs any ideas guys ?