Connect with us

Din rail timer

Discussion in 'General Electronics Discussion' started by Nicholas bray, Dec 13, 2016.

Scroll to continue with content
  1. Nicholas bray

    Nicholas bray

    33
    0
    Dec 19, 2015
    Hi can anyone point me in the direction of a din rail mounted timer that can be configured so that once it's triggered will give a short pulse on its output with 1 min gaps in between until the trigger is removed

    Thanks
    And merry christmas
    Nicky
     
  2. Minder

    Minder

    3,014
    640
    Apr 24, 2015
    Here is the usually available commercial models.
    M.
     

    Attached Files:

  3. Nicholas bray

    Nicholas bray

    33
    0
    Dec 19, 2015
    Thanks very much I'll have a read I was testing one on the bench this afternoon had it working but not sure it does what I want it to do
     
  4. Nicholas bray

    Nicholas bray

    33
    0
    Dec 19, 2015
    I think the repeat cycle (on first) would work as long as there were 2 timer adjustments where I could set timer on for 0.5 seconds for instance and timer 2 delay off time 60 secs
     
  5. Nicholas bray

    Nicholas bray

    33
    0
    Dec 19, 2015
    Screenshot_2016-12-13-20-53-26.png
     

    Attached Files:

  6. Nicholas bray

    Nicholas bray

    33
    0
    Dec 19, 2015
    Screenshot_2016-12-13-20-53-39.png
     
  7. Nicholas bray

    Nicholas bray

    33
    0
    Dec 19, 2015
    I think something like this would work but I can't find anything like it on rs any ideas guys ?
     
Ask a Question
Want to reply to this thread or ask your own question?
You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Electronics Point Logo
Continue to site
Quote of the day

-