Connect with us

crosley gas stove problem

Discussion in 'Electronic Repair' started by tempus fugit, Jun 19, 2005.

Scroll to continue with content
  1. tempus fugit

    tempus fugit Guest

    Hey all;

    Not exactly a repair question, but I was hoping someone might have some
    information or ideas about this. My inlaws have a Crosley gas stove that
    beeps a few minutes after it is plugged in for no apparent reason. They
    don't have an owner's manual, so we don't know if this is an actual
    malfunction or if there is some combination of button pushing that can turn
    this annoying little feature off. I have thought of just disconnecting the
    speaker, but if there is an easier fix, (and if it is actually supposed to
    do this because of some wrong setting) I'd try it first.
    The model # is CG3478XRA.

    Thanks
     
  2. Ken Weitzel

    Ken Weitzel Guest

    Hi Time Flies :)

    Don't have one, so can't speak much, but if no error code
    (F[something]) shows, then perhaps it's just saying hi, I'm working?

    Or perhaps asking you to set the time?

    Then again, if an error code does appear, here's a list
    of what they mean.

    http://www.repairclinic.com/0078.asp#Maytag4

    Take care.

    Ken
     
  3. tempus fugit

    tempus fugit Guest

    Thanks Ken.

    I don't think it's just saying hi, because it never quits. It beeps until
    you unplug it. It seems to me that someone set the time and the beeping
    didnt stop, but that's good thinking; I'll look into that.

    The error codes are a big help though. There too, I think someone mentioned
    F[something] being on the display, but I can't remeber what. At any rate,
    I'll look into those things too.

    Thanks again for your help.


     
Ask a Question
Want to reply to this thread or ask your own question?
You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Electronics Point Logo
Continue to site
Quote of the day

-