Maker Pro
Maker Pro

27" Memorex tv model:MT1127,chassis:11AK19-8A

S

Sidney

Jan 1, 1970
0
27" Memorex stereo tv model:MT1127,chassis:11AK19-8A (Vestel
chassis,commonly made in Turkey),year:Sept 1999,UL Listed:42GF.Unit
has RCA crt (made in Italy).
No remote control functions,I cleaned the remote and it it
transmitting,pcb location: MD501=IR receiver (looks identical to RCA #
245282 & 237536) has it's 5v B+ and it's 5V IR signal which toggles
when a remote control button is pushed.
Obviously MD501 is defective does anyone know if the above RCA IR
receivers will work?if not does anyone have any generic and other OEM
part #'s for the above part? as I have seen identical looking ones in
other brands of tv's but presently I don't have any in my shop to try.
Note:eek:n the top of the sensor the following #'s were stamped:
TK69 904
TSOP 1736

For tons of Vestel tv chassis:11AK19 repair tips:

http://www.avrepair.info/faults/VLO16619.HTM

Thanks in advance for replies.

Sidney
E-mail:[email protected]
Dartmouth,Nova Scotia
Canada
 
R

Rono

Jan 1, 1970
0
Generally, any infared receiver will work. They have ground, + 5 volts,
& output. If your'e getting output, the remote is putting out a signal, &
the receiver is working. Your remote may be off frequency. Try a friends
generic remote, to be sure. The receivers rarely go, unless something gets
spilt on it buy cleaning the crt screen, or by getting shorted out. Rono.


"
 
J

JR North

Jan 1, 1970
0
I guess Rono's 1(!) key must be worn out.
JR
 
Top