S
[email protected]
- Jan 1, 1970
- 0
27" Memorex stereo tv model:MT1127,chassis:11AK19-8A (Vestel
chassis,commonly made in Turkey),year:Sept 1999,UL Listed:42GF.Unit has
RCA crt (made in Italy).
There are tons of free Memorex service manual downloads at:
http://ads.hopperinc.com/form/product_search/search.asp?t=1
http://www.memorex.com
but they don't list model:MT1127 as it is not made by Orion or Emerson
but instead made by Vestel with a Vestel chassis of 11AK19 (also know
as 11AK19P5) and sold in many parts of the world as 27" Teac stereo
model:EU-68ST,chassis:11AK19 made in Turkey.
So if anyone has access to Euras:
http://www.euras.com/repair_tips_1/Vestel/11AK19/11AK19_Vestel.htm
if they could look up the repair tips (as Euras has tons of tips for
that chassis)for no vertical deflection as I replaced the following:
IC701=TDA8351=NTE7156
C632=1000 Uf,35v
C601=33 Uf,50v
C702=100 Uf,63v
and I soldered parts throughout tv and check the vcc resistor and diode
going back to flyback and it was fine,I still have no vertical
deflection.So if anyone could look up repair tips at any of these pay
sites:
http://www.Euras.com
http://www.winstip.com
http://www.repairhelper.com
http://www.shophelper.com
http://www.circuitwork.com/techassist/cgi-bin/yabb/YaBB.cgi
http://www.network54.com/Forum/27725 ("aftermarket Tech-Assist)
http://www.nesda-ohio.com
http://www.anatekcorp.com
Thanks in advance.
Sidney
Dartmouth,Nova Scotia
Canada
chassis,commonly made in Turkey),year:Sept 1999,UL Listed:42GF.Unit has
RCA crt (made in Italy).
There are tons of free Memorex service manual downloads at:
http://ads.hopperinc.com/form/product_search/search.asp?t=1
http://www.memorex.com
but they don't list model:MT1127 as it is not made by Orion or Emerson
but instead made by Vestel with a Vestel chassis of 11AK19 (also know
as 11AK19P5) and sold in many parts of the world as 27" Teac stereo
model:EU-68ST,chassis:11AK19 made in Turkey.
So if anyone has access to Euras:
http://www.euras.com/repair_tips_1/Vestel/11AK19/11AK19_Vestel.htm
if they could look up the repair tips (as Euras has tons of tips for
that chassis)for no vertical deflection as I replaced the following:
IC701=TDA8351=NTE7156
C632=1000 Uf,35v
C601=33 Uf,50v
C702=100 Uf,63v
and I soldered parts throughout tv and check the vcc resistor and diode
going back to flyback and it was fine,I still have no vertical
deflection.So if anyone could look up repair tips at any of these pay
sites:
http://www.Euras.com
http://www.winstip.com
http://www.repairhelper.com
http://www.shophelper.com
http://www.circuitwork.com/techassist/cgi-bin/yabb/YaBB.cgi
http://www.network54.com/Forum/27725 ("aftermarket Tech-Assist)
http://www.nesda-ohio.com
http://www.anatekcorp.com
Thanks in advance.
Sidney
Dartmouth,Nova Scotia
Canada