Connect with us

100MHz counter

Discussion in 'Datasheets, Manuals and Component Identification' started by duke37, May 20, 2011.

Scroll to continue with content
  1. duke37

    duke37

    5,364
    769
    Jan 9, 2011
    I have a 10Mhz frequency counter board based on a ICM7216A. I would like to count to a higher frequency than this and have looked at various decade counters, they do not go to 100Mhz.
    CD74LS90 42MHz
    SN7490A 42MHz
    74HCT4060 67MHZ
    74HC4017 ? 77MHz
    Are there any decade counters that go to 100MHz in Dip package (my mig welder won't do surface mount components!)
     
  2. davenn

    davenn Moderator

    13,782
    1,934
    Sep 5, 2009
    true,

    what you really need is a /10 prescaler chip :) do a google search on such
    many of them go far into the GHz range so you could seriously expand your counter's abilities

    Dave
     
  3. (*steve*)

    (*steve*) ¡sǝpodᴉʇuɐ ǝɥʇ ɹɐǝɥd Moderator

    25,480
    2,826
    Jan 21, 2010
    You can always make a twisted ring counter. It will (with 5 flip flops) divide by 10.

    Since only 1 flip flop changes state on each clock transition, you can use logic that otherwise incapable of switching at that speed.

    However, a dedicated prescaler may be a better option.
     
Ask a Question
Want to reply to this thread or ask your own question?
You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Electronics Point Logo
Continue to site
Quote of the day

-