Connect with us

Who makes this ugly ADT pir?

Discussion in 'Security Alarms' started by Crash Gordon, Feb 6, 2008.

Scroll to continue with content
  1. ssokoly

    ssokoly Guest

  2. Crash Gordon

    Crash Gordon Guest

  3. Crash Gordon

    Crash Gordon Guest

    Well...no, I didn't crawl above the ceiling tiles to check...just assumed
    that since they were too lazy to run 20 feet of wire to two doors (and put
    xmittrs there) that they did the same for the 2 pirs that are 15' in the
    other direction but easily prewired. 4 zones 2 are for sure wireless (the
    two doors) and 2 pirs...I'd have to go back and check tomorrow. It's
    definitely a Safewatch with a receiver though.

    I was too lazy to climb up 15' to where they mounted the panel :-(

    Thanks for the heads up...actually it's be nice if wired.

    Rob

    --
    **Crash Gordon**






    | No, GE sensors don't work with Honeywell receivers, I've seen a hardwired
    | motion that looks like that, you sure it's wireless?
    |
    | | > works with the 5800 series receivers I assume?
    | >
    | > thanks!
    | >
    | > --
    | > **Crash Gordon**
    | >
    | >
    | >
    | >
    | >
    | >
    | > | > | Crash Gordon wrote:
    | > | >
    | >
    |
    https://www.adt.com/wps/images/wcsstore/ADTCOM/images/catalog/items/medium/v22_rf_motion.gif
    | > | >
    | > | > Wireless pir...who makes it for them?
    | > | >
    | > | GE
    | >
    | >
    |
    |
     
  4. Crash Gordon

    Crash Gordon Guest

    Those kinda look like it..then I noticed the file name of the image I
    originally linked to: "v22_rf_motion.gif"

    Maybe it's a wireless version, like they way the Sharpshooter comes wireless
    for different manufacturers??

    --
    **Crash Gordon**






    |
    | | > Well...no, I didn't crawl above the ceiling tiles to check...just
    assumed
    | > that since they were too lazy to run 20 feet of wire to two doors (and
    put
    | > xmittrs there) that they did the same for the 2 pirs that are 15' in the
    | > other direction but easily prewired. 4 zones 2 are for sure wireless
    (the
    | > two doors) and 2 pirs...I'd have to go back and check tomorrow. It's
    | > definitely a Safewatch with a receiver though.
    | >
    | > I was too lazy to climb up 15' to where they mounted the panel :-(
    | >
    | > Thanks for the heads up...actually it's be nice if wired.
    | >
    | > Rob
    | >
    | > --
    | > **Crash Gordon**
    |
    | Here you go, scroll halfway down, it is hardwired.
    |
    |
    http://www.gesecurity.com/portal/si...66030730?selectedID=468&seriesyn=false&t=prod
    |
    |
     
  5. SantaUK

    SantaUK Guest

  6. Crash Gordon

    Crash Gordon Guest

    That sure looks like it...but I doubt it would work with Vista 5800 receiver
    or 6150RF keypad. Guess I gotta climb around again...which is a pain because
    it's doctor's office and I can only do it when there's no patients around.

    --
    **Crash Gordon**






    |I was looking again and GE does make an NX-482 that looks like that and is
    | wireless
    |
    | | > Those kinda look like it..then I noticed the file name of the image I
    | > originally linked to: "v22_rf_motion.gif"
    | >
    | > Maybe it's a wireless version, like they way the Sharpshooter comes
    | wireless
    | > for different manufacturers??
    | >
    | > --
    | > **Crash Gordon**
    | >
    | >
    | >
    | >
    | >
    | >
    | > | > |
    | > | | > | > Well...no, I didn't crawl above the ceiling tiles to check...just
    | > assumed
    | > | > that since they were too lazy to run 20 feet of wire to two doors
    (and
    | > put
    | > | > xmittrs there) that they did the same for the 2 pirs that are 15' in
    | the
    | > | > other direction but easily prewired. 4 zones 2 are for sure wireless
    | > (the
    | > | > two doors) and 2 pirs...I'd have to go back and check tomorrow. It's
    | > | > definitely a Safewatch with a receiver though.
    | > | >
    | > | > I was too lazy to climb up 15' to where they mounted the panel :-(
    | > | >
    | > | > Thanks for the heads up...actually it's be nice if wired.
    | > | >
    | > | > Rob
    | > | >
    | > | > --
    | > | > **Crash Gordon**
    | > |
    | > | Here you go, scroll halfway down, it is hardwired.
    | > |
    | > |
    | >
    |
    http://www.gesecurity.com/portal/si...66030730?selectedID=468&seriesyn=false&t=prod
    | > |
    | > |
    | >
    | >
    |
    |
     
Ask a Question
Want to reply to this thread or ask your own question?
You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Electronics Point Logo
Continue to site
Quote of the day

-