Hi, I need to control a DAC from a microcontroller which will inturn drive an amplifier, i'm going to make the DAC side of the circuit first without the controller and test it with an arduino, just needing to know if the attached circuit looks up to scratch and whether there's anything I could include to increase reliability etc?
Thanks
DAC
http://www.analog.com/media/en/technical-documentation/data-sheets/AD5040_5060.pdf
OpAmp
OP295AZ/883
Thanks
DAC
http://www.analog.com/media/en/technical-documentation/data-sheets/AD5040_5060.pdf
OpAmp
OP295AZ/883