Maker Pro
Maker Pro

RFC and guidance need in water pump by windbarrel

D

developer

Jan 1, 1970
0
this is the beginning of the water pump project for the people of Sichuen
where electric is not expensive but people is living mud house and very
poor. http://web7days.com/hydro/windbarrel/

initially this is an experiment of how the windbarrel really turns with the
wind ( any direction)


there is short piece of steel rod for guiding as the center of the
windbarrel.


RFC and guidance , please provide web site.


TIA.
 
D

developer

Jan 1, 1970
0
this is the beginning of the water pump project for the people of Sichuen
where electric is not expensive but people is living mud house and very
poor. http://web7days.com/hydro/windbarrel/

initially this is an experiment of how the windbarrel really turns with the
wind ( any direction)


there is short piece of steel rod for guiding as the center of the
windbarrel.


RFC and guidance , please provide web site.
if the wind barrel is successful , it will actually can drill hole into the
ground and 100 feet deep can be reached in three moths.

each each add 1 foot of pipe line in the vertical column. eventually the
water table is reached.

http://web7days.com/hydro/windbarrel




solar power arm board development team


http://arm.web7days.com arm board Philips 2106 US 45.00
http://www.web7days.com/led solar power control center
http://www.web7days.com/farm farming
 
K

Kiwi John

Jan 1, 1970
0
if your going to do that to lift water your better off using a car diff
put your wind mill where the drive shaft goes lock up one end leave on a
wheel stud and the basics are there they have have made these since the
model T came out and some of them are still working in Aussie
 
Top