Connect with us

Pioneer PDP 503 Problem

Discussion in 'Electronic Repair' started by [email protected], Feb 24, 2007.

Scroll to continue with content
  1. Guest

    I have a Pioneer PDP-503PU that shows this display without the media
    box attached. It shuts down after about 1 second of this display.
    For those who don't want to look at the images it's a green screen
    sort of divided up into thirds with the top being green, middle is
    white and bottom green again. It has an image of a television channel
    on it that is not clear, almost like the scan rate is wrong. My
    suspicions are a signal module, but I'm not convinced.

    What do you think could be at issue here, and fyi it does have the new
    power supply with the orange dot.

    http://www.mcmsys.com/~arts/pdp503-1.JPG
    http://www.mcmsys.com/~arts/pdp503-2.JPG
     
Ask a Question
Want to reply to this thread or ask your own question?
You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Electronics Point Logo
Continue to site
Quote of the day

-