Maker Pro
Maker Pro

Need Diamond View Model 1772 info

P

Peta

Jan 1, 1970
0
Could any kind soul please let me know the resistor value of R335 in this
monitor. Any info re the line output transformer would also be very helpful. EG
part number etc....Thanks to all who read this...Peta**
 
W

Wayne

Jan 1, 1970
0
Could any kind soul please let me know the resistor value of R335 in this
monitor. Any info re the line output transformer would also be very helpful. EG
part number etc....Thanks to all who read this...Peta**

From my notes...
Mitsubishi Diamond View (1772E) monitor FCC JVP7276E

If this is your monitor, you can download the service manual from...
http://rv6llh.rsuh.ru/shema.htm
The site is currently unavailable, though

R335 is 10k 1/4w in the 7276E, and is connected between the flyback
and the base of Q321, all part of the ABL circuitry. Likely bad FBT;
page on FBT testing here http://www.noahtec.com/fbtest.htm

Wayne
 
P

Peta

Jan 1, 1970
0
Dear Wayne....Thank you for your reply it was very helpful..Peta**
 
Top