Metal Punch Soruce ?

[Tim Wescott]

Mouser Electronics used to carry a small bench-top punch press that had dies
for that sort of thing. I don't have time to wade through their catalog,
but you might want to see what they have.

 

[Tim Wescott]

Depending on what you're doing it may be worthwhile to have your panels
laser cut. Obviously you can't do this with an existing box, but if you're
making flat panels or bending up boxes from same laser cutting is the way to
go.

 

[Khim Bittle]

hi,

I am looking for a panel punch for an amphenol 31-221-75rfx bnc panel
connector ... it requires a small D ( err.. circle with a flat on one
side ) hole , like .390 dia and .355 when measuring the flat.

I have googled and looked at greenlee ... but i have not found a
source and a us distributor for such a punch.

Anyone have a lead ? TIA KB

 

[Roger Gt]

message : hi,
:
: I am looking for a panel punch for an amphenol 31-221-75rfx bnc
panel
: connector ... it requires a small D ( err.. circle with a flat
on one
: side ) hole , like .390 dia and .355 when measuring the flat.
:
: I have googled and looked at greenlee ... but i have not found a
: source and a us distributor for such a punch.
:
: Anyone have a lead ? TIA KB
:


http://www.alliedelec.com/catalog/pf.asp?FN=1247.pdf

 

[JeffM]

panel punch for an amphenol 31-221-75rfx bnc panel connector

Khim Bittle

The granddaddy of manufacturers:
http://www.google.com/search?num=10...q=greenlee+punches+textron&btnG=Google+Search

 

[Al Clark]

Mouser Electronics used to carry a small bench-top punch press that
had dies for that sort of thing. I don't have time to wade through
their catalog, but you might want to see what they have.

I think they still carry the punch and tools on their web site.

 

[Active8]

hi,

I am looking for a panel punch for an amphenol 31-221-75rfx bnc panel
connector ... it requires a small D ( err.. circle with a flat on one
side ) hole , like .390 dia and .355 when measuring the flat.

I have googled and looked at greenlee ... but i have not found a
source and a us distributor for such a punch.

Anyone have a lead ? TIA KB

Mouser maybe.

Bainesville Electronics, Balto., MD also maybe. They have punches
anyway.