Lance Lawson
- Jul 1, 2011
- 2
- Joined
- Jul 1, 2011
- Messages
- 2
Hi I'm glad I found this forum! I have a Marantz SD 3020 cassette deck that I blew out the left LED meter in. This happened due to my screw driver shorting the variable resistor that controls the fine setting levels. The meter still works on input if the left channel is cranked up really high but very distorted due to the huge gain needed to get the LED to respond. Unfortunately I don't have an exact service manual for this deck but I have one for the next one up in the series (SD 4000) which is very similar. If I can locate the parts on the board that need replacing I can install them no problem but I don't have a reliable place to start.