Connect with us

Listening devices

Discussion in 'Misc Electronics' started by Dan Dan the Magic Man, Nov 16, 2003.

Scroll to continue with content
  1. Hi all,
    Is it it easy to make a device such as this?

    TX-1 Room Transitter

    i assume its pretty simple, has anyone got any instruction or a link on how
    create one.

    Thanks in advance guys

  2. Here's one.
    And many others.

    @@[email protected]@[email protected]@@[email protected]@[email protected]@[email protected]@@[email protected]@[email protected]@[email protected]@,@@[email protected]@[email protected],@@[email protected]@[email protected]@[email protected]@
    ###Got a Question about ELECTRONICS? Check HERE First:###
    My email address is whitelisted. *All* email sent to it
    goes directly to the trash unless you add NOSPAM in the
    Subject: line with other stuff. alondra101 <at>
    Don't be ripped off by the big book dealers. Go to the URL
    that will give you a choice and save you money(up to half). You'll be glad you did!
    Just when you thought you had all this figured out, the gov't
    changed it:
    @@[email protected]@[email protected]@[email protected]@[email protected]@[email protected]@[email protected]@@[email protected]@[email protected]@@[email protected]@[email protected]@[email protected]@[email protected]@[email protected]@[email protected]@@
  3. can any1 explain it in more laymans terms?? i have a basic knowlage of
    Ie just a list of parts and simple instructions????

    Cheers Guys
  4. Luhan Monat

    Luhan Monat Guest

    Its easy if you can build a project given a schematic, since that is how
    such designs are communicated. Until you can do that, there may be
    little anyone can do for you here.
Ask a Question
Want to reply to this thread or ask your own question?
You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Electronics Point Logo
Continue to site
Quote of the day