Connect with us

Kodak slide projector -- easiest fix ever

Discussion in 'Electronic Repair' started by Matthew Russotto, Sep 18, 2003.

Scroll to continue with content
  1. Got a Kodak Ektagraphic IIIA projector off eBay. Noisy fan and
    burned-out bulb. From observing the fan it was evident that it was
    moving up and down on its shaft and striking the housing. Rather than
    disassemble it, I was able to reach in through the fan with a small
    screwdriver and push the retaining clip back up into the correct
    position. No more noise.
Ask a Question
Want to reply to this thread or ask your own question?
You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Electronics Point Logo
Continue to site
Quote of the day