Connect with us

how to define the startup state of a flipflop?

Discussion in 'Electronic Basics' started by will, Jul 30, 2003.

Scroll to continue with content
  1. will

    will Guest

    i'm looking into a flipflop that has a well defined state during
    startup. can someone please tell me how to make a flip flop that
    allways starts in 0-state (or 1-state) with basical ports such as and,
    nand, nor, ...
    thanks in advance
     
  2. Reset (or set) it on power on. Depending on the power characteristics
    and allowable glitches, the circuit may be a simple RC network or
    something more complicated.
     
  3. eromlignod

    eromlignod Guest

    You just need a flip-flop with a "clear" line.

    Don
     
  4. will

    will Guest

    this has been a great help, but it seems like i wont be able to go
    around the use of a capacitor which is where i am searching for.
    thank you very much!
     
Ask a Question
Want to reply to this thread or ask your own question?
You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Electronics Point Logo
Continue to site
Quote of the day

-