Dear all!
I had a question about an Ektapro slide projector that I was wondering if someone could answer.
A few months ago, in a lapse of critical thinking I replaced my ektapro with an incorrect bulb.
There are three fuses, 1 directly for the primary circuit and 2 for the secondary circuit and I blew one of the secondary circuit.
The fuse that was blown was a GLASS T2AL/250V fuse. Not to worry I thought, I bought new bulbs and I bought a package of these fuses:
(Ø x l) 5 mm x 20 mm 2 A 250 V Traag -T in CERAMIC
https://www.conrad.nl/nl/eska-52272...2-a-250-v-traag-t-inhoud-10-stuks-523987.html.
The projector turns on fine, it works for a period of 10 minutes or so, and then... flickidy flick goes the bulb. But flickidy flick in a way that is controlled by the projector. Flickidy flick video is here:
Now if I remove either of the secondary circuit fuses for a SPLIT second carousel stops turning and fan stops but the flickidy flick inherently stops. Which makes me conclude I've replaced the the incorrect fuse?
Any advice would be absolutely appreciated!
I had a question about an Ektapro slide projector that I was wondering if someone could answer.
A few months ago, in a lapse of critical thinking I replaced my ektapro with an incorrect bulb.
There are three fuses, 1 directly for the primary circuit and 2 for the secondary circuit and I blew one of the secondary circuit.
The fuse that was blown was a GLASS T2AL/250V fuse. Not to worry I thought, I bought new bulbs and I bought a package of these fuses:
(Ø x l) 5 mm x 20 mm 2 A 250 V Traag -T in CERAMIC
https://www.conrad.nl/nl/eska-52272...2-a-250-v-traag-t-inhoud-10-stuks-523987.html.
The projector turns on fine, it works for a period of 10 minutes or so, and then... flickidy flick goes the bulb. But flickidy flick in a way that is controlled by the projector. Flickidy flick video is here:
Now if I remove either of the secondary circuit fuses for a SPLIT second carousel stops turning and fan stops but the flickidy flick inherently stops. Which makes me conclude I've replaced the the incorrect fuse?
Any advice would be absolutely appreciated!