I
Ian
- Jan 1, 1970
- 0
I've used SCSI2 commercial cables for LVDS at 100MHz with good successJohn Larkin said:I've used SCSI2 connectors and commercial cables for differential PECL
over short distances, but differential prop delays (one wire of the
pair relative to the other) added jitter, on the order of 30-40 ps rms
over a meter or two of cable.
John
(can't remember if it was 40 or 80 pairs). Worked to at least 10 metres
length.
I'm sure the headers were not vacuum tight at the connector end, but I think
the
junction between cable outer and connector body was pretty good.
Regards
Ian
and