J
Jim Thompson
- Jan 1, 1970
- 0
Anyone know of a CHEAP Linear Motor/Actuator?
I'd like at least 4-5" of travel.
Ideally I would simply feed this device a voltage and it would go to a
position accurate to 0.010", although realistically I could probably
live with 0.030" position accuracy.
If necessary I'm sure I could devise my own position feedback, if
necessary.
Thanks!
...Jim Thompson
I'd like at least 4-5" of travel.
Ideally I would simply feed this device a voltage and it would go to a
position accurate to 0.010", although realistically I could probably
live with 0.030" position accuracy.
If necessary I'm sure I could devise my own position feedback, if
necessary.
Thanks!
...Jim Thompson