H
HB2
- Jan 1, 1970
- 0
I have an Allen Bradley #2707-L8P2R DTAM that I am trying to replace.
When we put on the new one, it sees the PLC, but it will not let me
change values, where as the old one will. I know we are missing
something simple. Has anyone run into the same problem?
Thanks
Bill
When we put on the new one, it sees the PLC, but it will not let me
change values, where as the old one will. I know we are missing
something simple. Has anyone run into the same problem?
Thanks
Bill
