Why are they called "resistors"

[[email protected]]

Nonsense. You couldn't count your balls and get the same answer twice.

It's tough counting to zero.

 

[TheGlimmerMan]

I do not filch.

You are too fucking retarded to know what the words that describe your
pathetic behavior mean.

 

[TheGlimmerMan]

Let's just say that Archie has
cultivated a fan club of sorts. LOL
Can you guess why?

Egregious stalking by the egregiously retarded greegor.

 

[TheGlimmerMan]

From Archie's 100 known nyms?

Retarded pussies cannot count either. You are one such pussy, retard
boy.

 

[TheGlimmerMan]

No answer, eh? You may want to try reading a datasheet,

You are a complete and utter fool. No "eh" about it.

I laugh at the stupidity you think you get to foist onto others.

Sorry, dipshit. It stays firmly planted on your retarded face.

 

[JW]

You are a complete and utter fool. No "eh" about it.

I laugh at the stupidity you think you get to foist onto others.

Sorry, dipshit. It stays firmly planted on your retarded face.

Your original statement:

Never handle except with gloves. Not the package, and NOT the leads as
well.

Did you need a link to the datasheet in question? It clearly states how to
handle them and refutes what you stated above with regards to the leads.

A hint before you post again on subjects that require more than the
most trivial amount of brain power: some of us read books (and datasheets)
that aren't made of chewy thick cardboard with the aim of helping teething
toddlers cut their teeth.

HTH.

 

[TheGlimmerMan]

Did you need

I need you to FOAD. Please do. Would you like assistance?

 

[TheGlimmerMan]

A hint before you post again on subjects that require more than the
most trivial amount of brain power: some of us read books (and datasheets)
that aren't made of chewy thick cardboard with the aim of helping teething
toddlers cut their teeth.

Some of us live in the real world.

HV resistors are not to be handles with bare hands. Period.

You are the complete idiot on this bus.

Tell us, guru... what is the proper shape for a solder joint on an HV
multiplier node?

Someone should sprinkle raw Cadmium on your breakfast cereal.

 

[JW]

I need you to FOAD. Please do.

So why should I throw out what a datasheet says and listen to you? You're
AlwaysWrong.

Would you like assistance?

You're not man enough to admit you're wrong. So you certainly wouldn't man
enough to handle that either, you insignificant snot-bubble.

 

[JW]

Some of us live in the real world.

HV resistors are not to be handles with bare hands. Period.

The only one yapping about HV resistors is you, you eighth-wit clown.

You are the complete idiot on this bus.

Tell us, guru... what is the proper shape for a solder joint on an HV
multiplier node?

Why don't you solder a wire to that solder joint, attach it to your sloped
forehead with a ten penny nail, and turn on whatever it is that you're
blabbering about?

 

[TheGlimmerMan]

The only one yapping about HV resistors is you, you eighth-wit clown.

The resistors under discussion in this thread are HV resistors, idiot.

 

[JW]

The resistors under discussion in this thread are HV resistors, idiot.

My, my. How fucking persistent you are. As much as I admire a captain that
goes down with his ship, this really isn't the place for such heroics.

Your original statement, with the pertinent text underlined so even a
dimwit like you can locate it:

" It matters not what the surface is made of. It IS a surface!

THAT is what gets electron flows across it.

LV should be fairly stable, but I would still seal it after it becomes ^^^^^^^^^^^^^^^^^^^^^^^^^^
a cleaned assembly

Never handle except with gloves. Not the package, and NOT the leads as

^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ ^^^^^^^^^^^^^

well.

You are one brain-dead twat. In fact, you're so brain-dead I'll bet if you
were ever admitted to the hospital with a twisted ankle, they'd pull the
plug.

 

[TheGlimmerMan]

My, my.

Grow the **** up, asswipe.

Go abuse your retarded children.

How fucking persistent you are. As much as I admire a captain that
goes down with his ship, this really isn't the place for such heroics.

You're an E-1 grade idiot. The closest you ever came to being a hero
was something your right hand told you as you released your tiny dick
from its grasp.

Your original statement, with the pertinent text underlined so even a
dimwit like you can locate it:

It doesn't matter what application they are being used in, They are HV
resistors.

 

[JW]

Grow the **** up, asswipe.

Go abuse your retarded children.



You're an E-1 grade idiot. The closest you ever came to being a hero
was something your right hand told you as you released your tiny dick
from its grasp.

[AlwaysWrong cowardly snips and runs.]

Then comes up with this non-sequitur:

It doesn't matter what application they are being used in, They are HV
resistors.

If you don't start making some sense and address the exact point of this
discussion, I'm going to auction off your head on Ebay as a chemical
toilet for midget campers. Then again, you'd probably enjoy that given
your scat fetish.

 

[TheGlimmerMan]

Grow the **** up, asswipe.

Go abuse your retarded children.



You're an E-1 grade idiot. The closest you ever came to being a hero
was something your right hand told you as you released your tiny dick
from its grasp.

[AlwaysWrong cowardly snips and runs.]

You're an idiot. I do not QUOTE links... EVER. I never have. If you
have a problem with that, PISS OFF!

You piss off anyway, fucktard.

Then comes up with this non-sequitur:


If you don't start making some sense

You're a goddamned idiot, and that is all the sense that needs to be
made in this thread at this point.

and address the exact point of this
discussion,

If you are too goddamned retarded to understand what contaminants are,
and how they effect electrical circuitry, you should be in a discussion
with Roy about which bridge to jump off of.

Get back on the topic or shut the **** up, you complete and utter
retard.

I'm going to auction off your head

Little pussy retards like you talk a good one. There are plenty of
boxing rings in town. You are too much of a pussy though.

on Ebay as a chemical
toilet

You are a chemical toilet. You are all used up, ie FOS.

The sad thing is that you were that before you got used up.

for midget campers.

Know a lot of midget campers, do ya, boy?

Then again,

Then again, you are going to spout off with something even more
retarded than your last, pathetic, ineffectual crack.

you'd probably enjoy that given
your scat fetish.

You seem to believe everything every other fucking liar walking the
street tells you.

The boxing rings are open. The invitation to prove that you are not a
complete pussy stands.

Here, pussy, pussy, pussy.

 

[John - KD5YI]

Grow the **** up, asswipe.

Go abuse your retarded children.



You're an E-1 grade idiot. The closest you ever came to being a hero
was something your right hand told you as you released your tiny dick
from its grasp.

[AlwaysWrong cowardly snips and runs.]

Then comes up with this non-sequitur:

It doesn't matter what application they are being used in, They are HV
resistors.

If you don't start making some sense and address the exact point of this
discussion, I'm going to auction off your head on Ebay as a chemical
toilet for midget campers. Then again, you'd probably enjoy that given
your scat fetish.

You know, JW, the best part of GlimmerMan-tard dribbled down his momma's
leg.

I left him a bit, er, incomplete.

 

[JW]

My, my.


Grow the **** up, asswipe.

Go abuse your retarded children.

How fucking persistent you are. As much as I admire a captain that
goes down with his ship, this really isn't the place for such heroics.


You're an E-1 grade idiot. The closest you ever came to being a hero
was something your right hand told you as you released your tiny dick
from its grasp.

Your original statement, with the pertinent text underlined so even a
dimwit like you can locate it:

[AlwaysWrong cowardly snips and runs.]

You're an idiot. I do not QUOTE links... EVER. I never have. If you
have a problem with that, PISS OFF!

There were no links in what you snipped, just quoted text of yours that
you didn't seem to want to address, you insufferable moron.

Sheesh! The last time you picked your nose you must've yanked your brain
out.

You piss off anyway, fucktard.

What if I don't - you'll piss and whine some more?

You're a goddamned idiot, and that is all the sense that needs to be
made in this thread at this point.

So, why shouldn't these high resistance resistors be handled by the leads?
The datasheet explicitly mentions handling them by the leads.

If you are too goddamned retarded to understand what contaminants are,
and how they effect electrical circuitry, you should be in a discussion
with Roy about which bridge to jump off of.

Keep digging. When you get to China, you could always order some take-out.

So, why shouldn't these high resistance resistors be handled by the leads?
The datasheet explicitly mentions handling them by the leads.

Get back on the topic or shut the **** up, you complete and utter
retard.

I am perfectly on topic here, calling you out on your idiotic statements.

So, why shouldn't these high resistance resistors be handled by the leads?
The datasheet explicitly mentions handling them by the leads.

Little pussy retards like you talk a good one. There are plenty of
boxing rings in town. You are too much of a pussy though.

So, why shouldn't these high resistance resistors be handled by the leads?
The datasheet explicitly mentions handling them by the leads.

You are a chemical toilet. You are all used up, ie FOS.

IKYABWAI. That's all you've got.
So, why shouldn't these high resistance resistors be handled by the leads?
The datasheet explicitly mentions handling them by the leads.

The sad thing is that you were that before you got used up.


Know a lot of midget campers, do ya, boy?

Are you now claiming that there's no such thing as a midget camper?
So, why shouldn't these high resistance resistors be handled by the leads?
The datasheet explicitly mentions handling them by the leads.

Then again, you are going to spout off with something even more
retarded than your last, pathetic, ineffectual crack.

Don't like it? Too bad. Stamp your little foot, then go eat toothpaste
and hold your breath until you turn blue.

So, why shouldn't these high resistance resistors be handled by the leads?
The datasheet explicitly mentions handling them by the leads.

You seem to believe everything every other fucking liar walking the
street tells you.

The boxing rings are open. The invitation to prove that you are not a
complete pussy stands.

Here, pussy, pussy, pussy.

Sorry, you're not my type. If I ever change my sexual orientation, it
couldn't possibly be for someone who's so obviously mentally handicapped.

So, why shouldn't these high resistance resistors be handled by the leads?
The datasheet explicitly mentions handling them by the leads.

Why don't you just admit you're wrong?