Which motor

[skipster1978]

Hi all,
Im doing an engineering project which requires roughly 30 Nm of torque to lift 2.2 kg at a distance of 1m from the shaft moving at around 10RPM.
My trouble is i cant find any electric motors of this size or i may have calculated wrong.
Any help is much appreciated.

 

[shrtrnd]

You'll probably need gearing to mate with a motor that will do the job.
Check into stepper-type motors, that are high-torque, already-geared assemblies
that will give you the torque and speed you need.

 

[Resqueline]

Any geared motor that meets the torque & speed requirements will have a mechanical output power of at least 22.6W (~31.4W) and will do the job.
What power source is it supposed to run from? Any control requirements?

 

[skipster1978]

Any geared motor that meets the torque & speed requirements will have a mechanical output power of at least 22.6W (~31.4W) and will do the job.
What power source is it supposed to run from? Any control requirements?

Hi thanks for the reply,
I think i am going to use a motor of an outdoor awning (Tubular motor), I have no electrical limits,
The awning motor has 35Nm of torque and 12 Rpm although rather large im sure i can mount it. Thanks for you're help.