Where to get a better library for SwitcherCAD

[Anthony Fremont]

I haven't played with this stuff for a while, but I do remember scouring
around trying to find more components for SwitcherCAD without much success.
Does anyone know of a good location to get some ready-made librarys?

Thanks all

 

[Damir]

I haven't played with this stuff for a while, but I do remember scouring
around trying to find more components for SwitcherCAD without much success.
Does anyone know of a good location to get some ready-made librarys?

Thanks all

http://groups.yahoo.com/group/LTspiceFiles/files/Yahoo_Files_c_y_1.07.zip
http://groups.yahoo.com/group/LTspiceFiles/files/Yahoo_Files_a_b_1.07.zip

 

[Anthony Fremont]

http://groups.yahoo.com/group/LTspiceFiles/files/Yahoo_Files_c_y_1.07.zip
http://groups.yahoo.com/group/LTspiceFiles/files/Yahoo_Files_a_b_1.07.zip

THANKS! I will now try to figure out how to install them. ;-)

 

[Anthony Fremont]

THANKS! I will now try to figure out how to install them. ;-)

OK, I give up, I'm stupid. How do I install this stuff? I know I
should RTFM, but I'm kinda pressed for time right now, as if that's a good
excuse.

 

[Genome]

OK, I give up, I'm stupid. How do I install this stuff? I know I
should RTFM, but I'm kinda pressed for time right now, as if that's a good
excuse.

Dunno without looking at what might be in those files...... but

Have a look in C:\Program Files\LTC\SwCADIII\lib

There are two directories of interest. One is called sym and one is called
sub.

Create a new directory in sym with an appropriate name like downloaded_shit.

Copy all the downloaded .asy files into that one.

Copy all the downloaded .sub files into the sub directory.

When you start up LTspice downloaded_shit will show up in the list.

and you carry on from there..........

That might work.... However be careful, or rather more organised about
things......

I'm sure Helmutt will be along to sort you out properly.

DNA

 

[ehsjr]

I haven't played with this stuff for a while, but I do remember scouring
around trying to find more components for SwitcherCAD without much success.
Does anyone know of a good location to get some ready-made librarys?

Thanks all

Here's a link:
http://www.cadsoft.de/cgi-bin/downl...c/download.htm.en&dir=pub/userfiles/libraries

Watch out for line wrap.
Also, you may want to make your own library - here's
a link that might be helpful for that:
http://www.instructables.com/id/ERHQQ180Y3EP286NQY/

Ed

 

[Anthony Fremont]

Dunno without looking at what might be in those files...... but

Have a look in C:\Program Files\LTC\SwCADIII\lib

There are two directories of interest. One is called sym and one is
called sub.

Create a new directory in sym with an appropriate name like
downloaded_shit.
Copy all the downloaded .asy files into that one.

Copy all the downloaded .sub files into the sub directory.

When you start up LTspice downloaded_shit will show up in the list.

and you carry on from there..........

That might work.... However be careful, or rather more organised about
things......

I'm sure Helmutt will be along to sort you out properly.

DNA

Thanks for the help Genome, hopefully I'll have some time later to sort it
all out.

 

[Martin Riddle]

Here's a link:
http://www.cadsoft.de/cgi-bin/downl...c/download.htm.en&dir=pub/userfiles/libraries

Watch out for line wrap.
Also, you may want to make your own library - here's
a link that might be helpful for that:
http://www.instructables.com/id/ERHQQ180Y3EP286NQY/

Ed

Umm, OP said LTSpice.

I havent seen many Libs for SWcad, But you can take Spice models and easily
make Asy's for them. Check out the LTSpice group on Yahoo.

Cheers

 

[ehsjr]

Umm, OP said LTSpice.

I havent seen many Libs for SWcad, But you can take Spice models and easily
make Asy's for them. Check out the LTSpice group on Yahoo.

Cheers

Ooops. Here's the link:
http://www.linear.com/designtools/spice_models.jsp

Thanks for spotting that!

Ed