Where to buy (old type) phenolic wafer switches?

[Jeff]

Hi,
Could someone plse recommend a supplier of the old fashioned multi-section
phenolic wafer switches, as have a broken wafer to replace in a
multi-section band change switch.

I need a switch having 2 pole, 5 position wafers, with wafers being 1-3/8"
(34mm) dia, with 1-1/8" (29mm) spacing between mounting holes on the wafer.
Any suggestions appreciated.
JEFF
ZL3TNV

 

[Angulos]

Can you make a diagram of the old waffer and send it to me...I have a bunch of
those waffers and maybe I can match the one you need.
Alphie

 

[G.Beat]

Jeff -

IF the unit was a CentraLab or Oak rotary -- those product names are now
owned by ElectroSwitch.

Here is the web site with downloadable catalog. IF you have the
measurements --
all drawings are available on the web site for "off shelf" units. They also
mfg. custom wafers.
http://www.electro-nc.com/

Raleigh, NC -- USA is corporate headquarters.

Greg
w9gb

 

[Jeff]

Thanks Greg. Had a good look, but no switch with the right dimensions there.
The switch was made in England in the 60's.
JEFF