Maker Pro
Maker Pro

vl53l4cx (ToF Sensor) question

electronicsloverben

Oct 12, 2023
4
Joined
Oct 12, 2023
Messages
4
Does anyone know if there is a data logger that is compatible with the vl53l4cx? The data logger should show all of its parameters. I am using an OpenLog Artimus (data logger) from sparkfun, but it does not show all of the parameters listed in the data sheet (ex-NumberOfObjectsFound and VL53LX_TargetRangeData_t).
 

electronicsloverben

Oct 12, 2023
4
Joined
Oct 12, 2023
Messages
4
The sensor we are using (the VL53L4CX) is pin to pin compatible with the VL53L1X which the OLA is pre-configured to read data from. The OLA does read from some of the registers of L4CX, but the L4CX has more registers that are not possible to read with the OLA right now. I am wondering if anyone offers a data logger that is pre-configured to give all of the data that the L4CX receives.
 

Delta Prime

Jul 29, 2020
1,990
Joined
Jul 29, 2020
Messages
1,990
Okay I have confused you I've posted a similar sensor with the same application
Go straight to the manufacturer they'll give you a list of sensors that are compatible. If your particular sensor is not compatible with your Data logger then it's a learning experience that you have just paid for.
 
Top