E
ellendort
- Jan 1, 1970
- 0
RC Circuit assume RC(400ohms*25mfd) is constant and fixed which gives
10msec
How can i truncate the pulse according to the preset time.
In the other word i will be able to control the time from 0-10msec
according to users preset value
without changing the RC.
One way of doing this is by cascading high voltage switches in parallel
to the load sample so as
the CPU will trigger the switch according to users preset value.
For example:
User preset value 7msec
Therefore first 7msec pulse will be on the load sample then the CPU
will trigger the parallel
cascaded switches as the rest of the 3msec pulses will be dissipated on
the high voltage switches.
I'm wondering if there's any other way of doing this? I mean any way to
control this time 0 -
10msec?
Please advice.
10msec
How can i truncate the pulse according to the preset time.
In the other word i will be able to control the time from 0-10msec
according to users preset value
without changing the RC.
One way of doing this is by cascading high voltage switches in parallel
to the load sample so as
the CPU will trigger the switch according to users preset value.
For example:
User preset value 7msec
Therefore first 7msec pulse will be on the load sample then the CPU
will trigger the parallel
cascaded switches as the rest of the 3msec pulses will be dissipated on
the high voltage switches.
I'm wondering if there's any other way of doing this? I mean any way to
control this time 0 -
10msec?
Please advice.