Maker Pro
Maker Pro

Triac TB12B6C

C

Chaos Master

Jan 1, 1970
0
Hi.

When I was read the schematic at http://www.interq.or.jp/japan/se-
inoue/e_ckt24.htm ("power controller", or a light dimmer) I found on the
schematic the "TB12B6C" triac. Google is null about this triac.

Does someone here has data for this triac TB12B6C??

Thanks!

--
Chaos Master® | "I'm going under,
Posting from Brazil! | drowning in you
ICQ: 126375906 | I'm falling forever,
ask for e-mail/MSN | I've got to break through"
---------------------. -- Evanescence, "Going Under"
 
S

Spehro Pefhany

Jan 1, 1970
0
Hi.

When I was read the schematic at http://www.interq.or.jp/japan/se-
inoue/e_ckt24.htm ("power controller", or a light dimmer) I found on the
schematic the "TB12B6C" triac. Google is null about this triac.

Does someone here has data for this triac TB12B6C??

Thanks!

Just about any triac with sufficient voltage and current rating for
the load will work in that circuit. You can also use a Quadrac from
Teccor and lose the diac.

Best regards,
Spehro Pefhany
 
C

Chaos Master

Jan 1, 1970
0
mv /var/posts/Spehro Pefhany/[email protected] /dev/null:
Just about any triac with sufficient voltage and current rating for
the load will work in that circuit. You can also use a Quadrac from
Teccor and lose the diac.

Thank you!
--
Chaos Master® | "I'm going under,
Posting from Brazil! | drowning in you
ICQ: 126375906 | I'm falling forever,
ask for e-mail/MSN | I've got to break through"
---------------------. -- Evanescence, "Going Under"
 
Top