Check this tip :
---------------------------------------------------------------
Text pasted from WinSTIPS 2.0
http://www.ServiceSoftware.com
---------------------------------------------------------------
TOSHIBA 50A62
Color No Go On Main Picture But Pip Is Ok
Toshiba
Color Signal Is Present Going Into Q501 Pin #15. 1. Qw01 Surface Mount
Chip Defective And Not Passing Color Back Into Q501, Pin # 53.
2. Q401 Defective.
3. Comb Filter Defective Or Broken Trace From Board.
---------------------------------------------------------------
--
==========================
Jeff Stielau
Shoreline Electronics Repair
344 East Main Street
Clinton,CT 06413
860-399-1861
860-664-3535 (fax)
[email protected]
========================