Connect with us

Tape and box -- cut tape?

Discussion in 'Electronic Design' started by mkr5000, Jul 28, 2008.

Scroll to continue with content
  1. mkr5000

    mkr5000 Guest

    Finally bought myself a lead former (yeah !) -- now that leaded
    components are rapidly becoming has-been.

    And after buying bulk forever, I need to know --

    What is the difference between "cut tape" and "tape and box" that digi
    key has listed in their resistors?

    I know what tape and reel are --- are tape and box that "fanfold"
    arrangement?

    I need to start feeding my new lead former.

    THANKS
     
  2. Rich Grise

    Rich Grise Guest

    Have you tried asking Digi-Key? (or wherever you're getting them)

    Good Luck!
    Rich
     
  3. AKA "ammo pack".
    Should all be on the datasheets!

    In general, "tape and reel" would be parts on tape, rolled onto a reel
    (maybe 5,000 parts per reel). "tape and box" is the more compact
    folded version of that (maybe 2,000 parts per box). Cut tape would be
    some length removed from one of the previously mentioned types (small
    quantity only).
    Best regards,
    Spehro Pefhany
     
Ask a Question
Want to reply to this thread or ask your own question?
You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Electronics Point Logo
Continue to site
Quote of the day

-