TAA611B info needed

[Nocturnal1]

Hi,
Does anyone have a link to info on the low power amplifier chip TAA611B ?

I specifically need to know the supply voltage range, but would like all
other info available. I scoured the net for the datasheet to no avail.

Thank you,
Tom in Mn
nocone *at* uslink -dot- com

 

[Gert van den Heuvel]

Hi,
Does anyone have a link to info on the low power amplifier chip TAA611B ?

I specifically need to know the supply voltage range, but would like all
other info available. I scoured the net for the datasheet to no avail.

Thank you,
Tom in Mn
nocone *at* uslink -dot- com

Hi,

The only thing I could find is a schematic where it is used:
http://www.qrz.ru/reference/micro2/pic/2.shtml.

Unfortunately no supply voltages here.


HTH,

 

[Nocturnal1]

Thank you for your efforts - any little bit of information like that is
useful and I appreciate the time you took to help me search.
I know I 9VDC will work fine, but don't want to blow the chips with 12V if I
tried it.
~Tom

 

[Juhani]

Hi,
Does anyone have a link to info on the low power amplifier chip TAA611B ?

I specifically need to know the supply voltage range, but would like all
other info available. I scoured the net for the datasheet to no avail.

Thank you,
Tom in Mn
nocone *at* uslink -dot- com

My 1980 SGS-Ates databook says that the abs max supply voltage is 15V.
Most of the parameters are specd at 6V and 12V.
juhani

 

[Nocturnal1]

THANK YOU!!!
I appreciate the time you took to research this.
~Tom