Connect with us

SOIC/SOP desoldering

Discussion in 'General Electronics Discussion' started by bigone5500, Sep 3, 2015.

Scroll to continue with content
  1. bigone5500

    bigone5500

    712
    120
    Apr 9, 2014
    I tried this method today on a scrap board. The component I removed was a BD9488F. I have not been able to remove one of these type chips before without damaging the leads or pads. This method worked like a charm and only took a couple minutes. I used wire salvaged from an inductor on the same board.

     
  2. cjdelphi

    cjdelphi

    1,096
    104
    Oct 26, 2011
    I bought a paint stripper gun, although it works a charm if you don't give too much heat, but it's not great either because the fan in it blows components off the pcb lol

    I'll have to get a hotplate! Smd components are great but fiddly lol
     
  3. bigone5500

    bigone5500

    712
    120
    Apr 9, 2014
    I will be purchasing a hot air gun hopefully this month. Maybe it will work for what little I will be doing.
     
Ask a Question
Want to reply to this thread or ask your own question?
You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Electronics Point Logo
Continue to site
Quote of the day

-