Maker Pro
Maker Pro

Schematic Wacom Cintiq 21ux

Blabla

Aug 21, 2012
3
Joined
Aug 21, 2012
Messages
3
Hi,

do you know where i can get an Schematic diagram for an Wacom Cintiq 21ux. Mine has a broken capacitor and i need to replace it.
 

GreenGiant

Feb 9, 2012
842
Joined
Feb 9, 2012
Messages
842
How do you know that it has a broken capacitor?

Can you provide a picture of the capacitor?
 

Blabla

Aug 21, 2012
3
Joined
Aug 21, 2012
Messages
3
I checked the capacitor and it was broken.
Here is a picture. Its not the broken one, but it looks exactly the same.
ptbbnwj6gkit.jpg
 

GreenGiant

Feb 9, 2012
842
Joined
Feb 9, 2012
Messages
842
did you pull it out of the circuit and check it?
What test did you use to check it?

What determined that it was "Broken" if it had no numbers on it or anything?
 

Blabla

Aug 21, 2012
3
Joined
Aug 21, 2012
Messages
3
yes i pulled it out and checked the resistance.

I knew there was a short circuit and this capacitor was getting warm.
 

john monks

Mar 9, 2012
685
Joined
Mar 9, 2012
Messages
685
If you're lucky it is a capacitor on the power supply line.
What does the machine do with no capacitor?
If the machine messes up you might try various capacitors from .001uF to .1uF.
If this doesn't get it going i will be surprised.
 
Top