Looking for some help if possible to building a resistance heater. Would i be right in thinking that four 12 ohm resistors in parallel will give me 3 ohms and with 12 volts an output power heater of 200 watts if my four resistors are 50 watts each. Any help appreciated, my issue is thinking my power circuit is 3 ohms so only drawing 4 amps total, so would i be getting the 48 watts power output from each resistor, or am i only going to get 48 watts from the total of the four 12 ohm resistors. Thanks for any help.
-
Categories
-
Platforms
-
Content