I just had a stand hairdryer (one of those that you sit under) fail, and traced the failure to a thermal fuse (SEFUSE SF152E, 10A 250V, fails at 157 degrees C). I found the part on ebay (but couldn't find it on digikey). Instead of replacing with the same part and repeating the whole process the next time it fails, though, I'm hoping to replace the fuse with a thermal switch that will reset itself after shutting off. I'm new to all of this, though, and don't really know what I'm doing. Can anybody guide me to a suitable replacement? Thanks for any help you might provide!
-
Categories
-
Platforms
-
Content