Connect with us

rear wheel curb lights

Discussion in 'LEDs and Optoelectronics' started by jmohn3, Nov 4, 2012.

Scroll to continue with content
  1. jmohn3

    jmohn3

    1
    0
    Nov 4, 2012
    I've been looking for a 12 volt circuit design for turn signal activated (and cancelled) rear wheel curb lights (not blinking). Any help or direction would be appreciated.
     
  2. duke37

    duke37

    5,364
    772
    Jan 9, 2011
    Is it legal?

    To get a delayed turn off, you can charge a capacitor through a diode. The capacitor should have a resistor across it to disharge it after a time when there is no signal. This voltage could be connected to the gate of a fet which switches the extra lights.
     
Ask a Question
Want to reply to this thread or ask your own question?
You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Electronics Point Logo
Continue to site
Quote of the day

-