Re: How to default a simon 3 panel

[Jim]

Hi, this works with a simon 2 and may work for a 3

Reset Memory to the Factory Defaults
If it becomes necessary to set all programming back
to the factory defaults, do the following:
1. Open the Control Panel cover.
2. Unplug the transformer and the battery.
3. Simultaneously press Cancel, Clock Set, and
Minutes.
4. Restore power to the panel with either the battery
or the transformer while pressing these three buttons.
5. Plug in the transformer or connect the battery.
NOTE: If Phone Lock is on, options 04, 05, 06, 08, 09,
12, and 13 will not reset to their defaults.


sonitrol via HomeKB.com:

 

[Mark Leuck]

Hi, this works with a simon 2 and may work for a 3

Reset Memory to the Factory Defaults
If it becomes necessary to set all programming back
to the factory defaults, do the following:
1. Open the Control Panel cover.
2. Unplug the transformer and the battery.
3. Simultaneously press Cancel, Clock Set, and
Minutes.

The Simon 3 uses Minutes+