Connect with us

Question about going 110v to 220v with an electric motor

Discussion in 'Electrical Engineering' started by Loony, May 4, 2012.

Scroll to continue with content
  1. Loony

    Loony Guest

    I have a 110v motor that I want to use with 220v. I know that there is a
    process of removing some connections and placing them at others.

    There is a nice diagram available but I have no access website where I
    could show it. If someone could give me the URL of that site, I could
    deposit it there quickly.

  2. Loony

    Loony Guest

    Thanks for the quick reply.

    I have the wiring diagrams for 110 and 220. My problem is in
    interpreting some parts of it.
  3. Loony

    Loony Guest

    Yes, the wires are color coded but the switch has no numbers. There are
    4 connection points on the switch. I have 2 lovely pictures one for 110v
    and the other for 220v. All I need to do now is to dump those pics
    somewhere where they can be seen :)

    I'll have to look for Paul. He know all the things I don't.
  4. Loony

    Loony Guest

    Here is what I received:

    The original message was received at Sat, 5 May 2012 02:13:31 -0700
    from []

    ----- The following addresses had permanent fatal errors -----

    ----- Transcript of session follows -----
    550 5.1.2 <>... Host unknown (Name
    server: no data known)

    My newsgroup is News.Individual.Net - could that make any difference?
Ask a Question
Want to reply to this thread or ask your own question?
You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Electronics Point Logo
Continue to site
Quote of the day