Connect with us

Pic genie Micro controller Problems

Discussion in 'Microcontrollers, Programming and IoT' started by Milz2000, Mar 25, 2017.

Scroll to continue with content
  1. Milz2000


    Mar 25, 2017
    Im currently doing a project which has micro controller (Genie c14). for some reason when one pin is sent high, another pin is also outputting a 1.8v signal for no reason. Does anyone have any previous experience with this.
  2. Harald Kapp

    Harald Kapp Moderator Moderator

    Nov 17, 2011
    There is a reason. It's a matter of finding which one. Why not start by telling us which pins are involved and what are your actions to set one pin high (the relevant lines of code) to check for possible side effects?
    Arouse1973 likes this.
Ask a Question
Want to reply to this thread or ask your own question?
You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Electronics Point Logo
Continue to site
Quote of the day