Hello guys, I'm new here and I need help because I don't know much about this stuff.
This problem with my speakers started a week ago. First time I turn the main speaker on, the music plays fine for a few seconds, then the volume starts randomly decreasing and going back to normal, and even the LED light does the same, until it shuts down completely and there is no sound or LED light. Next time I turn it back on, I can hear the music for just a second this time, then it does the same thing again.
I took the transformer off just to see if I could get a replacement, but the guy in the store tested it and told me it was working fine. So what could be causing the problem?
It's not completely dead, but instead the power is irregular and then it shuts down, probably as a safety measure.
I need to repair it . I would appreciate any advice.
Also if you think you can help me I could post some pics.
I give some details below.
The speakers are Thonet & Vander Kürbis, bought 6 or 7 years ago
The transformer I took off reads :Input 240v~50hz Output 13.5v x 2 ~1.6A
From the transformer 3 cables go into the board, and that's all I know.
Thanks in advance.
This problem with my speakers started a week ago. First time I turn the main speaker on, the music plays fine for a few seconds, then the volume starts randomly decreasing and going back to normal, and even the LED light does the same, until it shuts down completely and there is no sound or LED light. Next time I turn it back on, I can hear the music for just a second this time, then it does the same thing again.
I took the transformer off just to see if I could get a replacement, but the guy in the store tested it and told me it was working fine. So what could be causing the problem?
It's not completely dead, but instead the power is irregular and then it shuts down, probably as a safety measure.
I need to repair it . I would appreciate any advice.
Also if you think you can help me I could post some pics.
I give some details below.
The speakers are Thonet & Vander Kürbis, bought 6 or 7 years ago
The transformer I took off reads :Input 240v~50hz Output 13.5v x 2 ~1.6A
From the transformer 3 cables go into the board, and that's all I know.
Thanks in advance.