R
Robert11
- Jan 1, 1970
- 0
Hello:
I understand that Copper No. 10 AWG is the correct wire size for a
circuit in a residence with a 30 amp circuit breaker.
If the wire used has the typical NM designation, is the insulation rated and
suitable for
220 V, as well as the conventional 110 V ?
Thanks,
B.
I understand that Copper No. 10 AWG is the correct wire size for a
circuit in a residence with a 30 amp circuit breaker.
If the wire used has the typical NM designation, is the insulation rated and
suitable for
220 V, as well as the conventional 110 V ?
Thanks,
B.