Maker Pro
Maker Pro

Newbie Needs Help Identifying an Electronic Component

Stephen Seales

Dec 5, 2016
2
Joined
Dec 5, 2016
Messages
2
Hey All...
Please have a look at what I believe to be a Potentiometer...but I'm not sure.
All I know is that the entire circuit board is an Aux Input to my 2007 Ford F250 Factory Stereo.
The component in the photos is suppose to control the DB input.
I would love to know what it is and where I can source another!
Any constructive help will be appreciated.
 

Attachments

  • Component_Photo_1.jpg
    Component_Photo_1.jpg
    202.3 KB · Views: 74
  • Component_Photo_2.jpg
    Component_Photo_2.jpg
    145.1 KB · Views: 69
  • Component_Photo_3.jpg
    Component_Photo_3.jpg
    120.4 KB · Views: 63
  • Component_Photo_4.jpg
    Component_Photo_4.jpg
    176.3 KB · Views: 70
  • Component_Photo_5.jpg
    Component_Photo_5.jpg
    79.3 KB · Views: 69

Stephen Seales

Dec 5, 2016
2
Joined
Dec 5, 2016
Messages
2
Do you know if there's any way to tell the Power Rating or the Nominal Total Resistance based on the markings?
 
Top