Connect with us

Need schematic inverter

Discussion in 'Electronic Design' started by NukeR, Feb 17, 2006.

Scroll to continue with content
  1. NukeR

    NukeR Guest

    Hi.
    I have inverter for cold cathode fluorescent lamp model PWB9786135 REV,
    Texas Instruments.
    I must connect inverter and lamp as individual devices without monitor
    LCD/laptop.
    Possibly power supply is +12V but I dont know where to connect lest
    nothing not damage.
    I finding information in google and materials Texas Instrumenst but
    nothing useful.

    Pic: http://willow.iie.uz.zgora.pl/~gcichy/yapig/view.php?gid=4&phid=8
    and more: http://willow.iie.uz.zgora.pl/~gcichy/yapig/view.php?gid=4

    I think connect:
    +12 PIN 2 and 6
    Ground PIN 1 and 7
    But I dont confident.
     
Ask a Question
Want to reply to this thread or ask your own question?
You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Electronics Point Logo
Continue to site
Quote of the day

-