Need a power supply design with TL494

[debugginglife]

Hi,

I tired to build a power supply with using TL494. However, i cant solve
the heat problem of the mosfet transistor. I would like to find an
electronics student or somebody else to solve my problem. He/She should
build a current controlled power supply and the input voltage will be
24-35VDC and the output will be determined according to current [2
amp]. I will send all the neccessary documents and other requirements.
If you give us a good job you will get more such desings in soon.

I intent to give 35USD + component expences for this design and it can
increase if i satisfy with your design.

Send an email to me

All the components will cost between 1-2 USD some are listed below:

TL494 [texas instruments] 0.3-0.5 USD
IRFZ34N [international rectifier] 0.25-0.5 USD

** All the datashhets and application notes will be send in a zip file

The payment will send via PAYPAL

 

[[email protected]]

Hi,

I tired to build a power supply with using TL494. However, i cant solve
the heat problem of the mosfet transistor. I would like to find an
electronics student or somebody else to solve my problem. He/She should
build a current controlled power supply and the input voltage will be
24-35VDC and the output will be determined according to current [2
amp]. I will send all the neccessary documents and other requirements.
If you give us a good job you will get more such desings in soon.

I intent to give 35USD + component expences for this design and it can
increase if i satisfy with your design.

Send an email to me

All the components will cost between 1-2 USD some are listed below:

TL494 [texas instruments] 0.3-0.5 USD
IRFZ34N [international rectifier] 0.25-0.5 USD

** All the datashhets and application notes will be send in a zip file

The payment will send via PAYPAL

You're kidding, right?

 

[debugginglife]

No.. it is not too hard to add a hard swithcing feature to my design

Hi,

I tired to build a power supply with using TL494. However, i cant solve
the heat problem of the mosfet transistor. I would like to find an
electronics student or somebody else to solve my problem. He/She should
build a current controlled power supply and the input voltage will be
24-35VDC and the output will be determined according to current [2
amp]. I will send all the neccessary documents and other requirements.
If you give us a good job you will get more such desings in soon.

I intent to give 35USD + component expences for this design and it can
increase if i satisfy with your design.

Send an email to me

All the components will cost between 1-2 USD some are listed below:

TL494 [texas instruments] 0.3-0.5 USD
IRFZ34N [international rectifier] 0.25-0.5 USD

** All the datashhets and application notes will be send in a zip file

The payment will send via PAYPAL

You're kidding, right?

 

[Fred Bartoli]

Continuying this annoying game of top posting.

If that's not too hard, just do it yourself.
$35 is about what it'd cost you for some of us here to just receive and open
you nice schematics.

Or I propose you a deal. I've my car to be fixed. Probably not too hard.
I'll pay for the parts expenses and also for your travel expenses (on the
basis of a bicycle travel, I'll pay the sandwiches).

Then I'll deal my hard won $35 against the $35 you'll win fixing my car.

Does this suits you?


--
Thanks,
Fred.

No.. it is not too hard to add a hard swithcing feature to my design

Hi,

I tired to build a power supply with using TL494. However, i cant solve
the heat problem of the mosfet transistor. I would like to find an
electronics student or somebody else to solve my problem. He/She should
build a current controlled power supply and the input voltage will be
24-35VDC and the output will be determined according to current [2
amp]. I will send all the neccessary documents and other requirements.
If you give us a good job you will get more such desings in soon.

I intent to give 35USD + component expences for this design and it can
increase if i satisfy with your design.

Send an email to me

All the components will cost between 1-2 USD some are listed below:

TL494 [texas instruments] 0.3-0.5 USD
IRFZ34N [international rectifier] 0.25-0.5 USD

** All the datashhets and application notes will be send in a zip file

The payment will send via PAYPAL

You're kidding, right?

 

[Fred Bartoli]

Hi,

I tired to build a power supply with using TL494. However, i cant solve
the heat problem of the mosfet transistor. I would like to find an
electronics student or somebody else to solve my problem. He/She should
build a current controlled power supply and the input voltage will be
24-35VDC and the output will be determined according to current [2
amp]. I will send all the neccessary documents and other requirements.
If you give us a good job you will get more such desings in soon.

I intent to give 35USD + component expences for this design and it can
increase if i satisfy with your design.

Send an email to me

All the components will cost between 1-2 USD some are listed below:

TL494 [texas instruments] 0.3-0.5 USD
IRFZ34N [international rectifier] 0.25-0.5 USD

** All the datashhets and application notes will be send in a zip file

The payment will send via PAYPAL

You're kidding, right?

Why would you think s/he is kidding?

That's the sad part of the story. He's surely not kidding at all.

 

[Spehro Pefhany]

Hi,

I tired to build a power supply with using TL494. However, i cant solve
the heat problem of the mosfet transistor. I would like to find an
electronics student or somebody else to solve my problem. He/She should
build a current controlled power supply and the input voltage will be
24-35VDC and the output will be determined according to current [2
amp]. I will send all the neccessary documents and other requirements.
If you give us a good job you will get more such desings in soon.

I intent to give 35USD + component expences for this design and it can
increase if i satisfy with your design.

Send an email to me

All the components will cost between 1-2 USD some are listed below:

TL494 [texas instruments] 0.3-0.5 USD
IRFZ34N [international rectifier] 0.25-0.5 USD

** All the datashhets and application notes will be send in a zip file

The payment will send via PAYPAL

You're kidding, right?

Why would you think s/he is kidding?


Best regards,
Spehro Pefhany

 

[debugginglife]

After your rude response i searched google and i found ti's application
note "slvae05" page 13 "hard swithing for voltage controlled power
supplies". it takes less than 15 minutes. 35$ is nice money for 15min
to 60 min searching net.

maybe u might earn 2.000.000 $ for your designs good luck

 

[[email protected]]

After your rude response i searched google and i found ti's application
note "slvae05" page 13 "hard swithing for voltage controlled power
supplies". it takes less than 15 minutes. 35$ is nice money for 15min
to 60 min searching net.

maybe u might earn 2.000.000 $ for your designs good luck

You just need a $35 design to blow up in your face to help you see the
light, don't you? You obviously don't understand the first thing about
what you're asking. There you have yourself a $35 lesson, we'll call it
even for the laugh you gave me.

 

[debugginglife]

You just need a $35 design to blow up in your face to help you see the
light, don't you? You obviously don't understand the first thing about
what you're asking. There you have yourself a $35 lesson, we'll call it
even for the laugh you gave me.

You are spending too much time for a well paid person you can earn
1000s $ in this time period. possibly the only thing that you can
manage to do is just talking. please shut up and return your well paid
job. if you dont like to the money that i offer for such an easy work
just ignore my message. i do not need your words if i need somebody to
talk silly things i can manage to find 1000s of them.

 

[Jim Thompson]

You are spending too much time for a well paid person you can earn
1000s $ in this time period. possibly the only thing that you can
manage to do is just talking. please shut up and return your well paid
job. if you dont like to the money that i offer for such an easy work
just ignore my message. i do not need your words if i need somebody to
talk silly things i can manage to find 1000s of them.

Ah, yes, yet another applicant for position of village idiot. PLONK!

...Jim Thompson

 

[Genome]

Hi,

I tired to build a power supply with using TL494. However, i cant solve
the heat problem of the mosfet transistor. I would like to find an
electronics student or somebody else to solve my problem. He/She should
build a current controlled power supply and the input voltage will be
24-35VDC and the output will be determined according to current [2
amp]. I will send all the neccessary documents and other requirements.
If you give us a good job you will get more such desings in soon.

I intent to give 35USD + component expences for this design and it can
increase if i satisfy with your design.

Send an email to me

All the components will cost between 1-2 USD some are listed below:

TL494 [texas instruments] 0.3-0.5 USD
IRFZ34N [international rectifier] 0.25-0.5 USD

** All the datashhets and application notes will be send in a zip file

The payment will send via PAYPAL

Hmmmm, 85.96.143.128...... Turkey.

I'm not too good with Geography... Were you expecting someone from Kurdistan
to reply (History isn't one of my fortes either).

Fortunately there are Universities in Turkey with students in them who are
not as lazy or potentially stupid as you are succeding to be. Oh bugger,
that means they won't jump at the chance to help you out either.

Damn.

I guess you will have to spend the rest of your life flipping Kebabs.

DNA

 

[Michael A. Terrell]

You are spending too much time for a well paid person you can earn
1000s $ in this time period. possibly the only thing that you can
manage to do is just talking. please shut up and return your well paid
job. if you dont like to the money that i offer for such an easy work
just ignore my message. i do not need your words if i need somebody to
talk silly things i can manage to find 1000s of them.

Do you really have that many mirrors around to see yourself thousands
of times? ;-)


--
Service to my country? Been there, Done that, and I've got my DD214 to
prove it.
Member of DAV #85.

Michael A. Terrell
Central Florida

 

[martin griffith]

On Wed, 10 May 2006 16:51:33 GMT, in sci.electronics.design "Genome"

snip

Fortunately there are Universities in Turkey with students in them who are
not as lazy or potentially stupid as you are succeding to be. Oh bugger,
that means they won't jump at the chance to help you out either.

Damn.

I guess you will have to spend the rest of your life flipping Kebabs.

DNA

How do you flip kebabs?


martin

 

[Genome]

On Wed, 10 May 2006 16:51:33 GMT, in sci.electronics.design "Genome"

snip
How do you flip kebabs?


martin

Is that before, during or after cooking them?

Anyway it's an American thing. Jim knows about this stuff so ask him and
leave me alone.

Smelly Paella eater.

DNA

 

[Pooh Bear]

I think he means the kind of shish kebab that are on small individual
wood or metal skewers (like souvlaki) and grilled, not the BrE doner
kebab type that's skived off of a vertical rotating skewer piled with
meat (what I'd call shawarma or gyro).

But I think the latter are more popular with the Turks. When they're
not implementing their byzantine schemes to invade Christian lands
such as Constantinople, that is.

Or the EU even ! ;-)

Graham

 

[Spehro Pefhany]

On Wed, 10 May 2006 16:51:33 GMT, in sci.electronics.design "Genome"

snip
How do you flip kebabs?


martin

I think he means the kind of shish kebab that are on small individual
wood or metal skewers (like souvlaki) and grilled, not the BrE doner
kebab type that's skived off of a vertical rotating skewer piled with
meat (what I'd call shawarma or gyro).

But I think the latter are more popular with the Turks. When they're
not implementing their byzantine schemes to invade Christian lands
such as Constantinople, that is.


Best regards,
Spehro Pefhany

 

[Genome]

I think he means the kind of shish kebab that are on small individual
wood or metal skewers (like souvlaki) and grilled, not the BrE doner
kebab type that's skived off of a vertical rotating skewer piled with
meat (what I'd call shawarma or gyro).

But I think the latter are more popular with the Turks. When they're
not implementing their byzantine schemes to invade Christian lands
such as Constantinople, that is.


Best regards,
Spehro Pefhany

Oh shit..... that sounds much too complicated. Perhaps McDonalds will come
up with a Doner Burger.

DNA

 

[Nico Coesel]

Oh shit..... that sounds much too complicated. Perhaps McDonalds will come
up with a Doner Burger.

They already served a Gyros (Greek) burger over here, so it might be
possible.

 

[Genome]

They already served a Gyros (Greek) burger over here, so it might be
possible.

--

Does that come with Big Bird?

DNA

 

[Michael A. Terrell]

Does that come with Big Bird?

Only on a Sesame Street bun.


--
Service to my country? Been there, Done that, and I've got my DD214 to
prove it.
Member of DAV #85.

Michael A. Terrell
Central Florida