Connect with us

Movement Sensor

Discussion in 'Sensors and Actuators' started by KingDing, Mar 4, 2012.

  1. KingDing

    KingDing

    1
    0
    Mar 4, 2012
    Hi all,

    First post so I come straight out with what I am trying to achieve.

    I want to make a Sensor that picks up movement then sends a signal wireless to a box in my pocket.


    I thought I would start with something like.
    1. Sensor - eBay Sensor
    2. RF Data TX/RX - eBay agian
    3. A buzzer or Vibrate in pocket.

    Now is this possible? or what else would I Need.

    King
     
  2. (*steve*)

    (*steve*) ¡sǝpodᴉʇuɐ ǝɥʇ ɹɐǝɥd Moderator

    25,220
    2,695
    Jan 21, 2010
    In the very simplest case, you could connect the sensor up so it powers the transmitter when it detects movement.

    Then you have the receiver connected so that when a signal is recieved it switches on the buzzer (this may require some smarts, at the very least a transistor and a resistor.

    unfortunately, when there is no activity, and the transmitter is transmitting nothing, the receiver may pick up random signals and the buzzer may operate anyway.

    Do you have any specs on the transmitter/receiver? Without these it's really pretty hard to offer a more specific answer (or one that will work)
     
Ask a Question
Want to reply to this thread or ask your own question?
You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Electronics Point Logo
Continue to site
Quote of the day

-