f22lightning
- Aug 27, 2012
- 5
- Joined
- Aug 27, 2012
- Messages
- 5
Okay so me and my friend want to build a maglev train, as far as how this will be setup we have it handled, the part I would like some help with is where I want to create a circuit or maybe even a pcb that would allow me to program a microcontroller to switch the polarity of the magnetic coils that we are building, I was told to use an H-bridge of which I know nothing about, I want to use a PICAXE so if you they have a chip with H-bridge built in then it would be great if not how can I go about creating an H-bridge circuit that is controlled with a picaxe chip, as much as you can would be great.
(if you think there's a better way to go about this without an H-bridge than please by all means let me know)
(if you think there's a better way to go about this without an H-bridge than please by all means let me know)