M
Mike Deblis
- Jan 1, 1970
- 0
Hi,
I hope that this is the right place to ask - if not, please tell me where to
go (nicely!)...
I have an old set of uniselectors that are part of a clock I'm restoring. I
would like to know more about the uniselectors and where I might get spare
ones of this type. Indeed, how to restore/clean them would be a help too
(they're rather grotty)!
The markings on them are as follows:
on the coil:
"1/DCO/240
T30338A
250ohm"
on the rotor:
"1/DW1/14"
on the back:
"2203A
4/30A S61/1"
There are 3 sets of contacts, each with 12 different contacts. They are
stiff and dirty, but will click round with a bit of help...
Thanks for any help you can provide.
Mike
I hope that this is the right place to ask - if not, please tell me where to
go (nicely!)...
I have an old set of uniselectors that are part of a clock I'm restoring. I
would like to know more about the uniselectors and where I might get spare
ones of this type. Indeed, how to restore/clean them would be a help too
(they're rather grotty)!
The markings on them are as follows:
on the coil:
"1/DCO/240
T30338A
250ohm"
on the rotor:
"1/DW1/14"
on the back:
"2203A
4/30A S61/1"
There are 3 sets of contacts, each with 12 different contacts. They are
stiff and dirty, but will click round with a bit of help...
Thanks for any help you can provide.
Mike