how large EMF field when Degaussing large CRT?

[Mike Sampieri]

Hello -

I have a new 23" CRT computer monitor, which degausses itself when turned
on.
I also have a color laser printer right next to the monitor - about 8
inches.

Since this monitor is so large, hence the degaussing coil is so "strong",
can the EMF field damage the printer circuitry? Or a computer?

If so, what's a good distance to keep away from the monitor, for electronic
devices and printers? 1 foot? 2 feet?

Thanks for any advice!

-Mike

 

[Vlad]

Hello -

I have a new 23" CRT computer monitor, which degausses itself when turned
on.
I also have a color laser printer right next to the monitor - about 8
inches.

Since this monitor is so large, hence the degaussing coil is so "strong",
can the EMF field damage the printer circuitry? Or a computer?

If so, what's a good distance to keep away from the monitor, for electronic
devices and printers? 1 foot? 2 feet?

Thanks for any advice!

-Mike

I don't think so.

Interference is related to the intensity of the signal and the
sensitivity of the equipment that can be affected.

Once I designed some audio/digital equipment that was installed about
10" above a High Voltage(3000Volts) 10 KW power transformer. It worked
OK because I have eliminated all signal transformers from my board.

I wouldn't store floppies or cassette tapes on top of the monitor

Vlad

 

[Robert Baer]

Hello -

I have a new 23" CRT computer monitor, which degausses itself when turned
on.
I also have a color laser printer right next to the monitor - about 8
inches.

Since this monitor is so large, hence the degaussing coil is so "strong",
can the EMF field damage the printer circuitry? Or a computer?

If so, what's a good distance to keep away from the monitor, for electronic
devices and printers? 1 foot? 2 feet?

Thanks for any advice!

-Mike

Not a problem.
The only time the degausser operates is during AC power on.
And the field strength is maximumin the middle; 8 inches away and
especially to a side, it is too weak to consider.
*** "alt.electronics is not a valid NG" ***