Maker Pro
Maker Pro

Hitachi TV

F

Frederic B.

Jan 1, 1970
0
Hi Group

I got a Hitachi tv model 26AX10BC in for repair (Chassis M1CLUX-H) which
suffers from vertical jitter and foldover at startup

when warming up the problem becomes less severe but still present...

I`ve changed so far all the electrolytics around the vertical IC and also
changed the IC to no avail...

ESR`ed (word?) most if not all of the caps in the tv and replaced doubtful
ones, also checked D752 D753 as per other tech`s instructions...

I am lost!!!
 
A

Art

Jan 1, 1970
0
Have you checked the "quality" of the power supply voltages to the
deflection circuits and of the sync signals. Obviously it is thermally
related so a bit of diligence with "Freeze Spray" may help. If the supplies
are noisy, with evidence of poor filtering, or if the sync - drive signals
are distorted when cold may affect the symptom. Strange but we have even
encountered regulators that change a bit during the first few minutes after
power up.
 
S

Shoreline Electronics

Jan 1, 1970
0
That model & chassis does not even come up on the Hitachi service site.

Is it an overseas model?

--
==========================
Jeff Stielau
Shoreline Electronics Repair
344 East Main Street
Clinton,CT 06413
860-399-1861
860-664-3535 (fax)
[email protected]
========================
"If you push something hard enough it will fall over."
Fudd's First Law of Opposition - Sir Sidney Fudd
 
Top