Connect with us

Foxboro 718TC Temperature controller

Discussion in 'Electronic Design' started by Russ Meredith, Mar 21, 2007.

Scroll to continue with content
  1. Does anyone know where I can get application notes on this controller?
    I want to use it for a lab furnace controller. This gadget has more
    functions then I need or understand. The Foxboro web site serves
    customers only.

    I have an instruction manual and a spec sheet. The instrument has
    been reset to factory default the config instructions have been
    followed as I understand them. I get a 299 error.

    Thanks

    Russ
     
  2. Bruce Varley

    Bruce Varley Guest

    You might do better posting this on sci.engr.control.
     
  3. I found I was using the wrong output to drive the ssr.

    Russ
     
Ask a Question
Want to reply to this thread or ask your own question?
You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Electronics Point Logo
Continue to site
Quote of the day

-